BIG REWORK NOTHING WORKS

CoreLibrary/Driver.py

@@ -0,0 +1,34 @@
+from abc import ABC, abstractmethod
+
+
+class Driver(ABC):
+    """docstring for Model."""
+
+
+
+    @abstractmethod
+    def exit(self):
+        """
+        disconnecting device
+        """
+        pass
+
+    @abstractmethod
+    def set_config(self, config: dict) -> None:
+        """
+        Setzen von Parameter die sich nie ändern Addresse usw.
+        """
+        pass
+
+    @abstractmethod
+    def get_config(self) -> dict:
+        pass
+
+
+    @abstractmethod
+    def get_status(self) -> dict:
+        """
+        Returns a dict from status information. These values are not needed for analysis
+        """
+        pass
+

CoreLibrary/ExampleCombined.py

@@ -0,0 +1,81 @@
+import logging
+from datetime import datetime
+from queue import Queue
+from random import random
+from threading import Thread, Event
+from time import sleep
+
+from Driver import Driver
+from Sensor import Sensor
+
+LOGGER = logging.getLogger()
+
+
+class ExampleDriverWorker(Thread):
+    """Communicates with the measuring hardware. Here we only produce random data."""
+
+    def __init__(self, message_queue):
+        super().__init__(name="Measure")
+        self.message_queue = message_queue
+        self.produceData = Event()
+        self.exit_request = Event()
+        self.prev = 0
+
+    def run(self):
+        """Worker method of a python Thread. Called when the Thread is started."""
+        while not self.exit_request.is_set():
+            if self.produceData.is_set():
+                temp = self.prev + random() / 100.0
+                self.prev = temp
+                ts = datetime.utcnow()
+                self.message_queue.put((ts, temp))
+            else:
+                pass
+            sleep(1)
+
+class ExampleDriver(Driver, Sensor):
+    """docstring for Model."""
+
+    def __init__(self):
+        super(Driver, self).__init__()
+        self.measureQueue = Queue()
+        self.measureThread = ExampleDriverWorker(self.measureQueue)
+        self.measureThread.start()
+        self.measureThread.produceData.set()
+        self.speed = 10
+        self.running = False
+
+    def exit(self):
+        self.measureThread.exit_request.set()
+
+    def set_config(self, config: dict):
+        self.speed = config["speed"]
+
+    def get_config(self):
+        return {"speed": self.speed}
+        pass
+
+    def get_status(self):
+        return {"running": self.running}
+
+    def start_measuring(self):
+        self.measureThread.produceData.set()
+        logging.info("I started meas")
+
+    def stop_measuring(self):
+        self.measureThread.produceData.clear()
+        logging.info("I stopped meas")
+
+    def exit(self):
+        self.stop_measuring()
+        self.measureThread.exit_request.set()
+
+    @property
+    def get_data(self):
+        time = []
+        val = []
+        while not self.measureQueue.empty():
+            t, data = self.measureQueue.get()
+            time.append(t)
+            val.append(data)
+        return time, val

CoreLibrary/ExampleDriver.py

@@ -2,7 +2,7 @@ from abc import abstractmethod
 from threading import Thread, Event
 from time import sleep
 from queue import Queue
-from driver import Driver
+from CoreLibrary.Driver import Driver
 import logging
 
 LOGGER = logging.getLogger()
@@ -13,6 +13,7 @@ class ExampleDriverWorker(Thread):
 
     def __init__(self, message_queue):
         super().__init__(name="Driver")
+        self.produceData = Event()
         self.exit_request = Event()
 
     def run(self):
@@ -36,12 +37,11 @@ class ExampleDriver(Driver):
     def exit(self):
         self.measureThread.exit_request.set()
 
-    def set_config(self, config):
+    def set_config(self, config: dict):
         self.speed = config["speed"]
 
     def get_status(self):
         return {"running": self.running}
 
-    @abstractmethod
     def get_config(self):
         pass

CoreLibrary/ExampleSensor.py

@@ -3,7 +3,7 @@ from threading import Thread, Event
 from time import sleep
 from queue import Queue
 from random import random
-from sensor import Sensor
+from CoreLibrary.Sensor import Sensor
 import logging
 
 LOGGER = logging.getLogger()

CoreLibrary/Measurement.py

@@ -1,8 +1,14 @@
 import os
 
-
 class Measurement:
-    def __init__(self, name, path=None, comment=None):
+    """
+    Handle data and write it in a file
+    """
+
+    def attach(self, sensor):
+        pass
+
+    def __init__(self, name, path=None, comment=None, writer=None):
         self.name = name
         self.path = os.path.join(path or "./meas_values", self.name)
         os.makedirs(self.path)
@@ -31,4 +37,4 @@ class Measurement:
             file.write("Version 0.1\n")
             if comment:
                 file.write(comment + "\n")
-            file.write("More descriptions of relevant parameters\n")
+            file.write("More descriptions of relevant parameters\n")

CoreLibrary/Param_Model.py

@@ -0,0 +1,59 @@
+from time import sleep
+from threading import Thread, Event
+
+from CoreLibrary.ExampleDriver import ExampleDriver
+from CoreLibrary.ExampleSensor import ExampleSensor
+from CoreLibrary.Measurement import Measurement
+from CoreLibrary.Plot_Data import Plot_Data
+
+
+class ExampleDriverWorker(Thread):
+    """Communicates with the measuring hardware. Here we only produce random data."""
+
+    def __init__(self, pd):
+        super().__init__(name="Data_Worker")
+        self.exit_request = Event()
+        self.pd = pd
+
+    def run(self):
+        """Worker method of a python Thread. Called when the Thread is started."""
+        while not self.exit_request.is_set():
+            self.pd.refresh()
+            sleep(1)
+
+
+class Param_Model:
+    def __init__(self):
+        self.drivers = {"treib1": ExampleDriver()}
+        self.sensors = {"mess1": ExampleSensor()}
+        self.__plot_data = []
+        self.__measurement = []
+
+    def new_measurement(self, name=None, writer=None) -> Measurement:
+        mess = Measurement(name=name)
+        self.__measurement.append(mess)
+        return mess
+
+    def get_plot_data(self):
+        plot_data = Plot_Data()
+        self.__plot_data.append(plot_data)
+        return plot_data
+
+    def refresh(self):
+        for name, sens in self.sensors:
+            data = sens.get_data
+            for meas in self.__measurement:
+                meas.append_data(name, data)
+            for pd in self.__plot_data:
+                pd.append_data(name, data)
+
+    def stop_measuring(self):
+        for sens in self.sensors.items():
+            sens.stop_measuring()
+        pass
+
+    def start_measuring(self):
+        pass
+
+    def exit(self):
+        pass

CoreLibrary/Plot_Data.py

@@ -1,8 +1,9 @@
-import numpy as np
 from datetime import datetime, timedelta
 
+import numpy as np
 
-class PlotData:
+
+class Plot_Data:
     def __init__(self):
 
         # resolution * timeout must be at least 2-3 times higher then the slowest refresh rate
@@ -60,7 +61,7 @@ class PlotData:
     def drop_old(self):
         for key in self.queues:
             time = np.array(self.queues[key][0])
-            old = self.data["time"][-1] - (self.timeout)
+            old = self.data["time"][-1] - self.timeout
             if time.size > 2:
                 drop_index = np.where(time < old)[0]
                 if len(drop_index) is not 0:

CoreLibrary/mess.py

@@ -0,0 +1,29 @@
+from time import sleep
+
+from CoreLibrary.Param_Model import Param_Model
+from CoreLibrary.Measurement import Measurement
+
+
+def main(param_model: Param_Model):
+    sensor = param_model.sensors["mess1"]
+    driver = param_model.drivers["treib1"]
+    driver.set_config({"speed": 2})
+    status = driver.get_status()
+
+    for speed in [1.0, 2.0, 3.0]:
+        print(speed)
+        driver.set_config({"speed": speed})
+
+        measurement = param_model.new_measurement(name=f"penis_{speed}", writer="CSV")
+        measurement.attach("mess1")
+
+        sensor.start_measuring()
+        sleep(1)
+        sensor.stop_measuring()
+    print("test")
+    sensor.exit()
+    driver.exit()
+
+if __name__ == '__main__':
+    pd = Param_Model()
+    main(pd)

FemtoDLPVA100F.py

@@ -1,212 +0,0 @@
-#!/usr/bin/env python3
-
-# from driver.Luci10 import Luci10
-import logging
-from numpy import floor
-from time import sleep
-from threading import Thread, Event
-from sensor import Sensor
-from driver import Driver
-
-LOGGER = logging.getLogger()
-
-
-class FemtoDLPVA100FWorker(Thread):
-    def __init__(
-        self,
-        name="FemtoDLPVA100F Worker",
-        index=1,
-        delay=0.2,
-    ):
-        super().__init__()
-        self.exit_request = Event()
-        self.dc = Event()
-        self.low_noise = Event()
-        self.lsbA = Event()
-        self.msbA = Event()
-        self.lsbB = Event()
-        self.msbB = Event()
-
-        self.overload_a = False
-        self.overload_b = False
-
-        self.name = name
-        # self.luci = Luci10(printer=False)
-        self.index = index
-        self.delay = delay
-
-    def run(self):
-        while not self.exit_request.is_set():
-
-            byte_a, byte_b = 0, 0
-            if self.lsbA.is_set():
-                byte_a |= 0b00000010  # Set 2nd bit to 1
-            if self.msbA.is_set():
-                byte_a += 4
-            if self.lsbB.is_set():
-                byte_b += 2
-            if self.msbB.is_set():
-                byte_b += 4
-            if self.dc.is_set():
-                byte_a += 8
-                byte_b += 8
-            if self.low_noise.is_set():
-                byte_a += 16
-                byte_b += 16
-
-            # self.luci.led_on()
-            # self.luci.write_bytes(self.index, byte_a, byte_b)
-            # self.luci.led_off()
-
-            LOGGER.debug(f"({self.name}) write bytes A, B: {byte_a:b}, {byte_b:b}")
-
-            sleep(self.delay)
-
-
-class FemtoDLPVA100F(Driver):
-    def __init__(self, name="FemtoDLPVA100F", index=1):
-
-        self.name = name
-        # self.luci = Luci10(printer=False)
-        self.index = index
-
-        self.overload_A = False
-        self.overload_B = False
-        self.check_overload()
-
-        self.femtoThread = FemtoDLPVA100FWorker()
-        self.femtoThread.dc.set()
-        self.femtoThread.low_noise.set()
-        self.femtoThread.lsbA.clear()
-        self.femtoThread.msbA.clear()
-        self.femtoThread.lsbB.clear()
-        self.femtoThread.msbB.clear()
-
-        self.femtoThread.start()
-
-        self.dc = True
-        self.low_noise = True
-        self.exp_a = 1
-        self.exp_b = 1
-
-    def check_overload(self):
-        overload_A = self.check_overload_a()
-        overload_B = self.check_overload_b()
-        return overload_A, overload_B
-
-    def get_status(self):
-        a, b = self.check_overload()
-        return {"overload_a": a, "overload_b": b}
-
-    def check_overload_a(self):
-        return False
-        # self.luci.led_on()
-        # self.overload_A = not self.luci.get_status_pin5(self.index)
-        # self.luci.led_off()
-        LOGGER.info(f"({self.name:s}) overload A: {self.overload_A}")
-        return self.overload_A
-
-    def check_overload_b(self):
-        return True
-        # self.luci.led_on()
-        # self.overload_B = not self.luci.get_status_pin6(self.index)
-        # self.luci.led_off()
-        LOGGER.info(f"({self.name:s}) overload B: {self.overload_B}")
-        return self.overload_B
-
-    def exit(self):
-        self.femtoThread.exit_request.set()
-        LOGGER.info("(%s) Thread closed." % self.name)
-
-    def get_config(self):
-        config = {
-            "dc": self.dc,
-            "low_noise": self.low_noise,
-            "exp_a": self.exp_a,
-            "exp_b": self.exp_b,
-        }
-        LOGGER.info("(%s) config: %s" % (self.name, config))
-
-        return config
-
-    def set_config(self, config):
-        # TODO proper dict parsing
-        exp_a = 1
-        exp_b = 1
-        dc = True
-        low_noise = True
-        self.dc = dc
-        if dc:
-            self.set_dc()
-        else:
-            self.reset_dc()
-        # TODO reduce spam
-        if low_noise:
-            self.set_low_noise()
-            self.low_noise = True
-        else:
-            self.reset_low_noise()
-            self.low_noise = False
-
-        self.set_exponent_a(exp_a=exp_a)
-        self.exp_a = exp_a
-        self.set_exponent_b(exp_b=exp_b)
-        self.exp_b = exp_b
-
-    def set_dc(self):
-        self.femtoThread.dc.set()
-        LOGGER.info("(%s) dc is set to %s" % (self.name, True))
-
-    def reset_dc(self):
-        self.femtoThread.dc.clear()
-        LOGGER.info("(%s) dc is set to %s" % (self.name, False))
-
-    def set_low_noise(self):
-        self.femtoThread.low_noise.set()
-        LOGGER.info("(%s) low noise is set to %s" % (self.name, True))
-
-    def reset_low_noise(self):
-        self.femtoThread.low_noise.clear()
-        LOGGER.info("(%s) low noise is set to %s" % (self.name, False))
-
-    def set_exponent_a(
-        self,
-        exp_a=1,
-    ):
-        if exp_a < 1:
-            exp_a = 1
-        if exp_a > 4:
-            exp_a = 4
-
-        if (exp_a % 2) == 0:
-            self.femtoThread.lsbA.set()
-        else:
-            self.femtoThread.lsbA.clear()
-
-        if (floor((exp_a - 1) / 2) - 1) == 0:
-            self.femtoThread.msbA.set()
-        else:
-            self.femtoThread.msbA.clear()
-
-        LOGGER.debug("(%s) exponent a = %i" % (self.name, exp_a))
-
-    def set_exponent_b(
-        self,
-        exp_b=1,
-    ):
-        if exp_b < 1:
-            exp_b = 1
-        if exp_b > 4:
-            exp_b = 4
-
-        if (exp_b % 2) == 0:
-            self.femtoThread.lsbB.set()
-        else:
-            self.femtoThread.lsbB.clear()
-
-        if (floor((exp_b - 1) / 2) - 1) == 0:
-            self.femtoThread.msbB.set()
-        else:
-            self.femtoThread.msbB.clear()
-
-        LOGGER.debug("(%s) exponent a = %i" % (self.name, exp_b))

driver.py

@@ -1,21 +0,0 @@
-from abc import ABC, abstractmethod
-
-
-class Driver(ABC):
-    """docstring for Model."""
-
-    @abstractmethod
-    def exit(self):
-        pass
-
-    @abstractmethod
-    def set_config(self, config):
-        pass
-
-    @abstractmethod
-    def get_status(self):
-        pass
-
-    @abstractmethod
-    def get_config(self):
-        pass

model.py

@@ -1,80 +0,0 @@
-"""
-API for scripting measurements and drivers
-
-Data:
-- dict with sensor data (temp, pressure, current)
-- dict with drivers (magnetic field control)
-"""
-from datetime import datetime
-from threading import Event, Thread
-from time import sleep
-from FemtoDLPVA100F import FemtoDLPVA100F
-from measurement import Measurement
-from plot_data import PlotData
-from ExampleSensor import ExampleSensor
-
-
-class DataGrabber(Thread):
-    def __init__(self, sensors, drivers, plot_data):
-        super().__init__()
-        self.measurement = None
-        self.sensors = sensors
-        self.drivers = drivers
-        self.plot_data = plot_data
-        self.exit_request = Event()
-
-    def run(self):
-        while not self.exit_request.is_set():
-            for name, sens in self.sensors.items():
-                dat = sens.get_data
-                self.plot_data.append_data(name, dat)
-                if self.measurement is not None:
-                    self.measurement.append_data(name, dat)
-            sleep(1)
-
-
-class Model:
-    def __init__(self):
-        self.plot_data = PlotData()
-        a = ExampleSensor()
-        self.sensors = {"temp": a, "multi": ExampleSensor()}
-        self.drivers = []
-        self.measurement = None
-        self.data_grabber = DataGrabber(self.sensors, self.drivers, self.plot_data)
-        self.data_grabber.start()
-
-    def start_measuring(self, meas_name=""):
-        name = meas_name or f"meas_{datetime.utcnow().isoformat().replace(':', '-')}"
-        self.measurement = Measurement(name)
-        self.data_grabber.measurement = self.measurement
-
-    def save_measuring(self, path="temp_temp.csv"):
-        print("Has no use delete me maybe")
-
-    def stop_measuring(self):
-        self.measurement = None
-        self.data_grabber.measurement = None
-
-    def clear(self):
-        self.plot_data.clear()
-
-    def exit(self):
-        self.data_grabber.exit_request.set()
-        for sens in self.sensors.values():
-            sens.exit()
-
-
-"""
-    init()
-    sensoren = []
-    
-    
-    for mag in range(10):
-        drive_to_value("MagnetFelied1", mag)
-        start_measuring("volt", "filename")
-        
-                  
-        
-        
-
-"""

my_control_script.py

@@ -1,17 +0,0 @@
-from time import sleep
-import model
-
-
-def main(param_model):
-    param_model.start_measuring()
-    with open("script_output.log", "w") as my_file:
-        for i in range(20):
-            sleep(0.5)
-        x, y = param_model.sensors["temp"].get_data
-        my_file.write(f"x: {x}, y: {y}\n")
-    param_model.stop_measuring()
-
-
-if __name__ == "__main__":
-    print("wrong call")
-    # main(model.Model())

plotView.py

@@ -24,13 +24,13 @@ LOGGER = logging.getLogger("mylogger")
 
 
 class PlotPanel(wx.Panel):
-    def __init__(self, parent, model, plotLambda, updateLambda):
+    def __init__(self, parent, pd, plotLambda, updateLambda):
         super().__init__(parent, -1)
 
         self.plotLambda = plotLambda
         self.updateLambda = updateLambda
 
-        self.model = model
+        self.pd = pd
         self.fig = Figure((15, 10), 75)
         self.canvas = FigureCanvas(self, -1, self.fig)
         self.toolbar = NavigationToolbar(self.canvas)  # matplotlib toolbar
@@ -46,7 +46,7 @@ class PlotPanel(wx.Panel):
         self.Bind(wx.EVT_PAINT, self.on_paint, self)
         self.ax = self.fig.add_subplot()
         self.fig.legend()
-        (self.im,) = self.plotLambda(self.ax,self.model.plot_data.data)
+        (self.im,) = self.plotLambda(self.ax,self.pd.data)
         self.toolbar.update()  # Not sure why this is needed - ADS
 
     def get_toolbar(self):
@@ -55,7 +55,7 @@ class PlotPanel(wx.Panel):
         return self.toolbar
 
     def on_paint(self, event):
-        dat = self.model.plot_data.data
+        dat = self.pd.data
         self.updateLambda(self.im, dat)
         self.ax.relim()
         self.ax.autoscale_view()

view.py

@@ -8,7 +8,6 @@ import importlib.machinery
 import logging
 from threading import Thread
 import wx
-from model import Model
 
 # begin wxGlade: dependencies
 # end wxGlade
@@ -22,6 +21,9 @@ from matplotlib.backends.backend_wxagg import (
     NavigationToolbar2WxAgg as NavigationToolbar,
 )
 from matplotlib.figure import Figure
+
+from CoreLibrary.Param_Model import Param_Model
+#from plotView import PlotPanel
 from plotView import PlotPanel
 
 LOGGER = logging.getLogger("myLogger")
@@ -36,7 +38,8 @@ LOGGER = logging.getLogger("myLogger")
 class MyFrame(wx.Frame):
     def __init__(self, *args, **kwds):
 
-        self.model = Model()
+        self.model = Param_Model()
+        self.pd = self.model.get_plot_data()
 
         # begin wxGlade: MyFrame.__init__
         kwds["style"] = kwds.get("style", 0) | wx.DEFAULT_FRAME_STYLE
@@ -100,14 +103,14 @@ class MyFrame(wx.Frame):
         self.tabs = wx.Notebook(self.panel_1, wx.ID_ANY)
         grid_sizer_main.Add(self.tabs, (0, 1), (1, 1), wx.EXPAND, 0)
 
-        plot = lambda ax, dat: ax.plot(dat["time"], dat["temp"])
-        update = lambda im, dat: im.set_data(dat["time"], dat["temp"])
-        self.plot_1 = PlotPanel(self.tabs, self.model, plot, update)
+        plot = lambda ax, dat: ax.plot(dat["time"], dat["mess1"])
+        update = lambda im, dat: im.set_data(dat["time"], dat["mess1"])
+        self.plot_1 = PlotPanel(self.tabs, self.pd, plot, update)
         self.tabs.AddPage(self.plot_1, "Temp")
 
-        plot = lambda ax, dat: ax.plot(dat["time"], dat["multi"])
-        update = lambda im, dat: im.set_data(dat["time"], dat["multi"])
-        self.plot_2 = PlotPanel(self.tabs, self.model, plot, update)
+        plot = lambda ax, dat: ax.plot(dat["time"], dat["mess1"])
+        update = lambda im, dat: im.set_data(dat["time"], dat["mess1"])
+        self.plot_2 = PlotPanel(self.tabs, self.pd, plot, update)
         self.tabs.AddPage(self.plot_2, "Multi")
 
 
@@ -171,6 +174,7 @@ class MyFrame(wx.Frame):
     def update(self, event):
         #Repaint gui
         self.tabs.Refresh()
+        self.model.refresh()
         #Unlock if script is finished
         if self.runner_thread is not None:
             if not self.runner_thread.is_alive():